|RangePro X8 User Manual for Pixhawk Based Systems
|Details on how to safely set up, use, and maintain a Pixhawk based RangePro X8.
|RangePro X8 User Manual for A3 Based Systems
|Details on how to safely set up, use, and maintain an A3-based RangePro X8.
|RangePro X8 Safety Manual
|General safety instructions for all RangePro X8 models.
|Using the D400 Charger with RangePro RP6S24KHDA Battery
|Details on how to safely setup and use the SkyRC D400 battery charger with the RangePro RP6S24KHDA battery.
|Lithium Battery Shipping Notice
|Details on requirements for shipping LiPo batteries. While every effort is made to keep this document up to date, check with your selected carrier to ensure all current regulations are being followed at the time of shipment.
|RPX8GMK301 Installation Instructions
|Installation instructions for the RPX8GMK301 three point gimbal hangar compatible with Zenmuse XT2 and Z30 gimbal camera systems
|RPX8GMK401 Installation Instructions
|Installation instructions for the RPX8GMK401 four point gimbal hangar compatible with Zenmuse X3, X5, X5R, XT, and Z3 gimbal camera systems
|Details on TerraView’s Product Warranty.
|DJI Lightbridge 2 User Manual, v1.6
|Details on how to set up and use both the DJI ground controller and the airborne link.
|DJI A3 Pro Disclaimer, v1.2
|Important safety warnings to be heeded whenever you are flying a drone.
|DJI A3 Pro In The Box, v1.2
|List of the A3 components that are integrated into a DJI-based RangePro X8. Not all components listed as being included in the box are used.
|DJI A3 Pro Quick Start Guide, v1.2
|Quick overview of the A3 components that are integrated into a DJI-based RangePro X8.
|DJI A3 Pro User Manual, v1.4
|Detailed manual covering the A3 components that are integrated into a DJI-based RangePro X8. Includes extensive information on safe operation and details of error codes that may be encountered during aircraft operations.
|SkyRC D400 Charger Manual, v1.2
|SkyRC LiPoPal Instruction Manual
|RangePro Out of the Case
|Removing RPX8 from the case and installing landing gear
|RangePro Antenna Installation
|Installing antennas on the RPX8
|RangePro Unfolding Arms & Props
|Unfolding RPX8 arms and props in preparation for flight
|RangePro with FLIR Duo Pro R
|Installation of FLIR Duo Pro on RPX8
|RangePro with Sony RX100
|Installation of Sony RX100 on RPX8
|RangePro Folding Props & Arms
|Folding RPX8 arms and props in preparation for stowage